Customized Transparent Acrylic Aquarium, Acrylic Cylinder, Acrylic Cylinder manufacturer / supplier in China, offering Customized Transparent Acrylic Cylinder Aquarium, Cylinder Acrylic Aquarium, Good Transparent and Cost Effective Acrylic Sheet and so on.
Guanke Aquarium now brings you high quality and effective customized transparent acrylic cylinder aquarium fish tank made in China from a large selection of products with cheap price. Should you're interested in it, welcome to buy the products in stock with our suppliers and check the quotation with us.
Basic Info
Model NO.: FT-2020
Acrylic Aquarium Color: Transparent
Acrylic Aquarium Refractive Index: 1.49+0.01
Acrylic Tensile Elongation at Break: ≥2%
Acrylic Compressiye Yield Strength: ≥103MPa
Acrylic Aquarium Shear Ultimate Strength: ≥55MPa
Kind: Acrylic Cylinder
Contraction Percentage: Bellow 1.5
Trademark: GAKO
Origin: China.shenzhen
Acrylic Aquarium Thickness: From 2mm to 20 mm
Acrylic Lzod Notched Impact Strength: ≥13.3j/M
Acrylic Aquarium Tensile Ultimate Streng: ≥62MPa
Acrylic Aquarium Tensile Modulus: ≥2760MPa
Compressiye Modulus Elasticity: ≥2760MPa
Material:
Water Absorption: 0.069
Tensile Strength: (51~80)MPa
Specification: 20*20*20cm
PROPERTIES | VALUE | Method ASTM | VALUE | Method DIN |
Density (specific weight) | 1,19 g/cm 3 | D 792 | 1,19 g/cm 3 | 53479 |
Modulus of elasticity | 32.000 Kg./cm 2 | D 790 | 3200 N/mm 2 | 53457 |
Tensile Strenght | 740 kg/cm 2 | D 638 | 74 kg/cm 2 | 53455 |
Flexural Strenght | 1200 kg/cm 2 | D 790 | 120 kg/cm 2 | 53452 |
Elongation at break | 3,0 % | D 638 | 3,0 % | 53455 |
Impact Strenght (Izod) | 2,0 kg/cm | D 256 | 2,0 kg/m 2 | 53453 |
Impact Strenght (Charpy) | 25 kg/cm | D 256 | 27 kg/m 2 | 53453 |
Rockwell Hardness | M 100 | D 785 | / | / |
Ball Drop H98/30 | / | / | 200 N/mm 2 | 53453 |
PROPERTIES | VALUE | Method ASTM | VALUE | Method DIN |
Coefficient of thermal conductivity | 5,0 10 -4 cal/cm s ° C | C 177 | 0,19 W/m°C | 52612 |
Deflection temperat.- 1,8 N/mm 2 | 105 °C | D 648 | 105 °C | 53461 |
Softenig Point (Vicat) | > 115 °C | D 1525 | > 115 °C | 53460 |
Coef. Linear Thermal Expantion | 7,5 10 -5 1/°C | D 696 | 75 10 -4 1/°C | VDE0304/1 |
Specific Heat | 0,35 cal/g°C | / | / | / |
PROPERTIES | VALUE | Method ASTM | VALUE | Method DIN | ||
Dielectric Strength | 20 kV/mm | D 149 | 20 kV/mm | 53461 | ||
Volume Resistivity | 1 10 15 Ohm/cm | D 257 | / | / | ||
Surface Resistivity | 1 10 14 Ohm | D 257 | 1 10 14 Ohm | 53482 | ||
Transversal Resistivity | > 10 15 Ohm/cm | D 257 | ||||
Dielectric Constant (50 Hz) | 3,5 | D 150 | 3,5 | 53483 | ||
Power Factor (50 Hz) | 0,05 | D 150 | 0,06 | 53483 | ||
PROPERTIES | VALUE | Method ASTM | VALUE | Method DIN |
Refractive Index n 20 D | 1,49 | D 542 | 1,49 | 53491 |
Light Transmittance | 92% | D 1003/A | 92 % | 5036 |
Turbidity (Haze) | 0,5% | D 1003/A | / | / |
PROPERTIES | VALUE | METHOD |
Medium molecular weight | 800 – 1000 10 3 uma | viscous |
Resistance to acids | good | / |
Resistance to bases | good | / |
Resistance to chlorous solvents ( methylene chloride, chloroform, trichloroethylene etc.) | low | / |
Resistance to non chlorous solvents (acetone,alcohol, petrol, etc.) | medium | / |
PROPERTIES | VALUE | METHOD |
Flame propagation | 22 – 28 mm/min. | ASTM D635/63 |
Igniting T. | 280 – 300 °C | ASTM D 93 |
Autoigniting T. | 425 °C | DIN 51794 |
Calorific power | 6600 kcal/kg | / |
Oxygen index | 18 | ASTM D28/63 |
Flammability | class B2 | DIN 4102 |
Smoke density (Flamming) | Dm 50 | NBS |
PROPERTIES | VALUE | METHOD |
Water absorption rate | 30 mg | ISO 62, m.l |
Max % increase of weight after water immersion | 2,1% | ISO 62, m.l |
Coef.of steam permeability | 2,3 10 -10 g/cmPa | / |
Coef.of N2 permeability | 4,5 10 -15 g/cmPa | / |
Coef.of O2 permeability | 2,0 10 -14 g/cmPa | / |
Coef.of CO2 permeability | 1,1 10 -13 g/cmPa | / |
Coef. of air permeability | 8,3 10 -15 g/cmPa | / |